CurveProxy

Public Class

Represent curve geometry. Usually this is part of another piece of geometry that can be represented as a “proxy”.

Inheritance Hierarchy

System.Object
Rhino.Runtime.CommonObject
Rhino.Geometry.GeometryBase
Rhino.Geometry.Curve
Rhino.Geometry.CurveProxy
Rhino.Geometry.BrepEdge
Rhino.Geometry.BrepTrim

Namespace: Rhino.Geometry

Assembly: RhinoCommon (in RhinoCommon.dll)

Syntax

public class CurveProxy : Curve

The CurveProxy type exposes the following members.

Constructors

Name

Description

Protected Method

CurveProxy

Protected constructor for internal use.

Properties

Name

Description

Public Property

Degree

Gets the maximum algebraic degree of any span or a good estimate if curve spans are not algebraic.

(Inherited from Curve.)

Public Property

Dimension

Gets the dimension of the object.

The dimension is typically three. For parameter space trimming curves the dimension is two. In rare cases the dimension can be one or greater than three.

(Inherited from Curve.)

Public Property

Disposed

Indicates if this object has been disposed or the document it originally belonged to has been disposed.

(Inherited from CommonObject.)

Public Property

Domain

Gets or sets the domain of the curve.

(Inherited from Curve.)

Public Property

HasBrepForm

Returns true if the Brep.TryConvertBrep function will be successful for this object

(Inherited from GeometryBase.)

Public Property

HasUserData

Gets true if this class has any custom information attached to it through UserData.

(Inherited from CommonObject.)

Public Property

IsClosed

Gets a value indicating whether or not this curve is a closed curve.

(Inherited from Curve.)

Public Property

IsDeformable

true if object can be accurately modified with “squishy” transformations like projections, shears, and non-uniform scaling.

(Inherited from GeometryBase.)

Public Property

IsDocumentControlled

If true this object may not be modified. Any properties or functions that attempt to modify this object when it is set to “IsReadOnly” will throw a NotSupportedException.

(Inherited from GeometryBase.)

Public Property

IsPeriodic

Gets a value indicating whether or not this curve is considered to be Periodic.

(Inherited from Curve.)

Public Property
IsSubDFriendly

Returns true if the curve is a cubic, non-rational, uniform NURBS curve that is either periodic or has natural end conditions. Otherwise, false is returned.

(Inherited from Curve.)

Public Property

IsValid

Tests an object to see if it is valid.

(Inherited from CommonObject.)

Public Property

ObjectType

Useful for switch statements that need to differentiate between basic object types like points, curves, surfaces, and so on.

(Inherited from GeometryBase.)

Public Property

PointAtEnd

Evaluates point at the end of the curve.

(Inherited from Curve.)

Public Property

PointAtStart

Evaluates point at the start of the curve.

(Inherited from Curve.)

Public Property

ProxyCurveIsReversed

True if “this” is a curve is reversed from the “real” curve geometry

Public Property

SpanCount

Gets the number of non-empty smooth (c-infinity) spans in the curve.

(Inherited from Curve.)

Public Property
TangentAtEnd

Evaluate unit tangent vector at the end of the curve.

(Inherited from Curve.)

Public Property
TangentAtStart

Evaluates the unit tangent vector at the start of the curve.

(Inherited from Curve.)

Public Property

UserData

List of custom information that is attached to this class.

(Inherited from CommonObject.)

Public Property

UserDictionary

Dictionary of custom information attached to this class. The dictionary is actually user data provided as an easy to use shareable set of information.

(Inherited from CommonObject.)

Public Property

UserStringCount

Gets the amount of user strings.

(Inherited from GeometryBase.)

Methods

Name

Description

Public Method

ChangeClosedCurveSeam

If this curve is closed, then modify it so that the start/end point is at curve parameter t.

(Inherited from Curve.)

Public Method

ChangeDimension

Changes the dimension of a curve.

(Inherited from Curve.)

Public Method

ClosedCurveOrientation.

Determines the orientation (counterclockwise or clockwise) of a closed, planar curve in the world XY plane. Only works with simple (no self intersections) closed, planar curves.

(Inherited from Curve.)

Public Method

ClosedCurveOrientation(Plane)

Determines the orientation (counterclockwise or clockwise) of a closed, planar curve in a given plane. Only works with simple (no self intersections) closed, planar curves.

(Inherited from Curve.)

Public Method

ClosedCurveOrientation(Transform)

Determines the orientation (counterclockwise or clockwise) of a closed, planar curve. Only works with simple (no self intersections) closed, planar curves.

(Inherited from Curve.)

Public Method

ClosedCurveOrientation(Vector3d)

Determines the orientation (counterclockwise or clockwise) of a closed, planar curve in a given plane. Only works with simple (no self intersections) closed, planar curves.

(Inherited from Curve.)

Public Method

ClosestPoint(Point3d, Double.)

Finds parameter of the point on a curve that is closest to testPoint. If the maximumDistance parameter is > 0, then only points whose distance to the given point is <= maximumDistance will be returned. Using a positive value of maximumDistance can substantially speed up the search.

(Inherited from Curve.)

Public Method

ClosestPoint(Point3d, Double., Double)

Finds the parameter of the point on a curve that is closest to testPoint. If the maximumDistance parameter is > 0, then only points whose distance to the given point is <= maximumDistance will be returned. Using a positive value of maximumDistance can substantially speed up the search.

(Inherited from Curve.)

Public Method

ClosestPoints(Curve, Point3d., Point3d.)

Gets closest points between this and another curves.

(Inherited from Curve.)

Public Method

ClosestPoints(IEnumerable.GeometryBase., Point3d., Point3d., Int32.)

Finds the object (and the closest point in that object) that is closest to this curve.

Breps, surfaces, curves and point clouds are examples of objects that can be passed to this function.

(Inherited from Curve.)

Public Method

ClosestPoints(IEnumerable.GeometryBase., Point3d., Point3d., Int32., Double)

Finds the object (and the closest point in that object) that is closest to this curve.

Breps, surfaces, curves and point clouds are examples of objects that can be passed to this function.

(Inherited from Curve.)

Public Method

CombineShortSegments

Looks for segments that are shorter than tolerance that can be combined. For NURBS of degree greater than 1, spans are combined by removing knots. Similarly for NURBS segments of polycurves. Otherwise, RemoveShortSegments() is called. Does not change the domain, but it will change the relative parameterization.

(Inherited from Curve.)

Public Method

ComponentIndex

If this piece of geometry is a component in something larger, like a BrepEdge in a Brep, then this function returns the component index.

(Inherited from GeometryBase.)

Protected Method

ConstructConstObject

Assigns a parent object and a sub-object index to this.

(Inherited from CommonObject.)

Public Method

Contains(Point3d)

Obsolete.

Computes the relationship between a point and a closed curve region. This curve must be closed or the return value will be Unset. Both curve and point are projected to the World XY plane.

(Inherited from Curve.)

Public Method

Contains(Point3d, Plane)

Obsolete.

Computes the relationship between a point and a closed curve region. This curve must be closed or the return value will be Unset.

(Inherited from Curve.)

Public Method

Contains(Point3d, Plane, Double)

Computes the relationship between a point and a closed curve region. This curve must be closed or the return value will be Unset.

(Inherited from Curve.)

Public Method

ControlPolygon

Gets the curve’s control polygon.

(Inherited from Curve.)

Public Method
Code Example
CurvatureAt

Evaluate the curvature vector at a curve parameter.

(Inherited from Curve.)

Public Method

DataCRC

Returns a CRC calculated from the information that defines the object. This CRC can be used as a quick way to see if two objects are not identical.

(Inherited from GeometryBase.)

Public Method

DeleteAllUserStrings

(Inherited from GeometryBase.)

Public Method

DeleteUserString

(Inherited from GeometryBase.)

Public Method

DerivativeAt(Double, Int32)

Evaluate the derivatives at the specified curve parameter.

(Inherited from Curve.)

Public Method

DerivativeAt(Double, Int32, CurveEvaluationSide)

Evaluate the derivatives at the specified curve parameter.

(Inherited from Curve.)

Public Method

Dispose.

Actively reclaims unmanaged resources that this instance uses.

(Inherited from CommonObject.)

Protected Method

Dispose(Boolean)

For derived class implementers.

This method is called with argument true when class user calls Dispose(), while with argument false when the Garbage Collector invokes the finalizer, or Finalize() method.

You must reclaim all used unmanaged resources in both cases, and can use this chance to call Dispose on disposable fields if the argument is true.

Also, you must call the base virtual method within your overriding method.

(Inherited from Curve.)

Public Method

DivideAsContour

Divides this curve at fixed steps along a defined contour line.

(Inherited from Curve.)

Public Method

DivideByCount(Int32, Boolean)

Divide the curve into a number of equal-length segments.

(Inherited from Curve.)

Public Method

DivideByCount(Int32, Boolean, .Point3d..)

Divide the curve into a number of equal-length segments.

(Inherited from Curve.)

Public Method
Code Example

DivideByLength(Double, Boolean)

Divide the curve into specific length segments.

(Inherited from Curve.)

Public Method
Code Example

DivideByLength(Double, Boolean, .Point3d..)

Divide the curve into specific length segments.

(Inherited from Curve.)

Public Method
Code Example

DivideByLength(Double, Boolean, Boolean)

Divide the curve into specific length segments.

(Inherited from Curve.)

Public Method
Code Example

DivideByLength(Double, Boolean, Boolean, .Point3d..)

Divide the curve into specific length segments.

(Inherited from Curve.)

Public Method

DivideEquidistant

Calculates 3d points on a curve where the linear distance between the points is equal.

(Inherited from Curve.)

Public Method

Duplicate

Constructs an exact duplicate of this Curve.

(Inherited from Curve.)

Public Method
Code Example

DuplicateCurve

Constructs an exact duplicate of this curve.

(Inherited from Curve.)

Public Method
DuplicateSegments

Duplicates curve segments. Explodes polylines, polycurves and G1 discontinuous NURBS curves. Single segment curves, such as lines, arcs, unkinked NURBS curves, are duplicated.

(Inherited from Curve.)

Public Method

DuplicateShallow

Constructs a light copy of this object. By “light”, it is meant that the same underlying data is used until something is done to attempt to change it. For example, you could have a shallow copy of a very heavy mesh object and the same underlying data will be used when doing things like inspecting the number of faces on the mesh. If you modify the location of one of the mesh vertices, the shallow copy will create a full duplicate of the underlying mesh data and the shallow copy will become a deep copy.

(Inherited from GeometryBase.)

Public Method

EnsurePrivateCopy

If you want to keep a copy of this class around by holding onto it in a variable after a command completes, call EnsurePrivateCopy to make sure that this class is not tied to the document. You can call this function as many times as you want.

(Inherited from CommonObject.)

Public Method

Equals

Determines whether the specified object is equal to the current object.

(Inherited from Object.)

Public Method

Extend(Interval)

Where possible, analytically extends curve to include the given domain. This will not work on closed curves. The original curve will be identical to the restriction of the resulting curve to the original curve domain.

(Inherited from Curve.)

Public Method

Extend(Double, Double)

(Inherited from Curve.)

Public Method

Extend(CurveEnd, CurveExtensionStyle, Point3d)

Extends a curve to a point.

(Inherited from Curve.)

Public Method
Code Example

Extend(CurveEnd, CurveExtensionStyle, IEnumerable.GeometryBase.)

Extends a curve until it intersects a collection of objects.

(Inherited from Curve.)

Public Method

Extend(CurveEnd, Double, CurveExtensionStyle)

Extends a curve by a specific length.

(Inherited from Curve.)

Public Method

ExtendByArc

Extends a curve by an Arc until it intersects a collection of objects.

(Inherited from Curve.)

Public Method

ExtendByLine

Extends a curve by a line until it intersects a collection of objects.

(Inherited from Curve.)

Public Method

ExtendOnSurface(CurveEnd, BrepFace)

Extends a curve on a surface.

(Inherited from Curve.)

Public Method

ExtendOnSurface(CurveEnd, Surface)

Extends a curve on a surface.

(Inherited from Curve.)

Public Method

ExtremeParameters

Returns the parameter values of all local extrema. Parameter values are in increasing order so consecutive extrema define an interval on which each component of the curve is monotone. Note, non-periodic curves always return the end points.

(Inherited from Curve.)

Public Method

Fair

Fairs a curve object. Fair works best on degree 3 (cubic) curves. Attempts to remove large curvature variations while limiting the geometry changes to be no more than the specified tolerance.

(Inherited from Curve.)

Public Method

FilletSurfaceToCurve

Creates a constant-radius fillet surface between a surface and the curve.

(Inherited from Curve.)

Public Method
FilletSurfaceToRail

Creates a surface between two surfaces, with a fixed rail curve on the first surface.

(Inherited from Curve.)

Protected Method

Finalize

Passively reclaims unmanaged resources when the class user did not explicitly call Dispose().

(Inherited from CommonObject.)

Public Method
FindLocalInflection

Local minimization for point on a curve with tangent perpendicular to N.

(Inherited from Curve.)

Public Method

Fit

Fits a new curve through an existing curve.

(Inherited from Curve.)

Public Method

FrameAt

Returns a 3d frame at a parameter.

(Inherited from Curve.)

Public Method
Code Example

GetBoundingBox(Boolean)

Bounding box solver. Gets the world axis aligned bounding box for the geometry.

(Inherited from GeometryBase.)

Public Method
Code Example

GetBoundingBox(Plane)

Aligned Bounding box solver. Gets the plane aligned bounding box.

(Inherited from GeometryBase.)

Public Method

GetBoundingBox(Transform)

Aligned Bounding box solver. Gets the world axis aligned bounding box for the transformed geometry.

(Inherited from GeometryBase.)

Public Method

GetBoundingBox(Plane, Box.)

Aligned Bounding box solver. Gets the plane aligned bounding box.

(Inherited from GeometryBase.)

Public Method

GetConicSectionType.

Returns the type of conic section based on the curve’s shape.

(Inherited from Curve.)

Public Method

GetConicSectionType(Point3d., Point3d., Point3d.)

Returns the type of conic section based on the curve’s shape.

(Inherited from Curve.)

Public Method
GetCurveParameterFromNurbsFormParameter

Convert a NURBS curve parameter to a curve parameter.

(Inherited from Curve.)

Public Method

GetHashCode

Serves as the default hash function.

(Inherited from Object.)

Public Method
Code Example

GetLength.

Gets the length of the curve with a fractional tolerance of 1.0e-8.

(Inherited from Curve.)

Public Method

GetLength(Double)

Get the length of the curve.

(Inherited from Curve.)

Public Method

GetLength(Interval)

Get the length of a sub-section of the curve with a fractional tolerance of 1e-8.

(Inherited from Curve.)

Public Method

GetLength(Double, Interval)

Get the length of a sub-section of the curve.

(Inherited from Curve.)

Public Method

GetLocalPerpPoint(Point3d, Double, Double.)

Search for a location on the curve, near seedParmameter, that is perpendicular to a test point.

(Inherited from Curve.)

Public Method

GetLocalPerpPoint(Point3d, Double, Interval, Double.)

Search for a location on the curve, near seedParmameter, that is perpendicular to a test point.

(Inherited from Curve.)

Public Method

GetLocalTangentPoint(Point3d, Double, Double.)

Search for a location on the curve, near seedParmameter, that is tangent to a test point.

(Inherited from Curve.)

Public Method

GetLocalTangentPoint(Point3d, Double, Interval, Double.)

Search for a location on the curve, near seedParmameter, that is tangent to a test point.

(Inherited from Curve.)

Public Method

GetNextDiscontinuity(Continuity, Double, Double, Double.)

Searches for a derivative, tangent, or curvature discontinuity.

(Inherited from Curve.)

Public Method

GetNextDiscontinuity(Continuity, Double, Double, Double, Double, Double.)

Searches for a derivative, tangent, or curvature discontinuity.

(Inherited from Curve.)

Public Method
GetNurbsFormParameterFromCurveParameter

Convert a curve parameter to a NURBS curve parameter.

(Inherited from Curve.)

Public Method

GetObjectData

Populates a System.Runtime.Serialization.SerializationInfo with the data needed to serialize the target object.

(Inherited from CommonObject.)

Public Method

GetPerpendicularFrames

Gets a collection of perpendicular frames along the curve. Perpendicular frames are also known as ‘Zero-twisting frames’ and they minimize rotation from one frame to the next.

(Inherited from Curve.)

Public Method
GetSubCurves

Gets subcurves from a curve. The results will be similar to what is produced by Rhino’s Explode command.

(Inherited from Curve.)

Public Method

GetType

Gets the Type of the current instance.

(Inherited from Object.)

Public Method

GetUserString

Gets user string from this geometry.

(Inherited from GeometryBase.)

Public Method

GetUserStrings

Gets a copy of all (user key string, user value string) pairs attached to this geometry.

(Inherited from GeometryBase.)

Public Method

HasNurbsForm

Does a NURBS curve representation of this curve exist?

(Inherited from Curve.)

Public Method

InflectionPoints.

Returns a curve’s inflection points. An inflection point is a location on a curve at which the sign of the curvature (i.e., the concavity) changes. The curvature at these locations is always 0.

(Inherited from Curve.)

Public Method

InflectionPoints(.Double..)

Returns a curve’s inflection points. An inflection point is a location on a curve at which the sign of the curvature (i.e., the concavity) changes. The curvature at these locations is always 0.

(Inherited from Curve.)

Public Method

IsArc.

Test a curve to see if it can be represented by an arc or circle within RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

IsArc(Double)

Test a curve to see if it can be represented by an arc or circle within the given tolerance.

(Inherited from Curve.)

Public Method

IsCircle.

Test a curve to see if it can be represented by a circle within RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

IsCircle(Double)

Test a curve to see if it can be represented by a circle within the given tolerance.

(Inherited from Curve.)

Public Method

IsClosable(Double)

Decide if it makes sense to close off this curve by moving the endpoint to the start based on start-end gap size and length of curve as approximated by chord defined by 6 points.

(Inherited from Curve.)

Public Method

IsClosable(Double, Double, Double)

Decide if it makes sense to close off this curve by moving the endpoint to the start based on start-end gap size and length of curve as approximated by chord defined by 6 points.

(Inherited from Curve.)

Public Method

IsContinuous

Test continuity at a curve parameter value.

(Inherited from Curve.)

Public Method

IsEllipse.

Test a curve to see if it can be represented by an ellipse within RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

IsEllipse(Double)

Test a curve to see if it can be represented by an ellipse within a given tolerance.

(Inherited from Curve.)

Public Method

IsInPlane(Plane)

Test a curve to see if it lies in a specific plane.

(Inherited from Curve.)

Public Method

IsInPlane(Plane, Double)

Test a curve to see if it lies in a specific plane.

(Inherited from Curve.)

Public Method
Code Example

IsLinear.

Test a curve to see if it is linear to within RhinoMath.ZeroTolerance units (1e-12).

(Inherited from Curve.)

Public Method

IsLinear(Double)

Test a curve to see if it is linear to within the custom tolerance.

(Inherited from Curve.)

Public Method
Code Example

IsPlanar.

Test a curve for planarity.

(Inherited from Curve.)

Public Method

IsPlanar(Double)

Test a curve for planarity.

(Inherited from Curve.)

Public Method
Code Example

IsPolyline

Several types of Curve can have the form of a polyline including a degree 1 NurbsCurve, a PolylineCurve, and a PolyCurve all of whose segments are some form of polyline. IsPolyline tests a curve to see if it can be represented as a polyline.

(Inherited from Curve.)

Public Method
Code Example
IsShort(Double)

Used to quickly find short curves.

(Inherited from Curve.)

Public Method
IsShort(Double, Interval)

Used to quickly find short curves.

(Inherited from Curve.)

Public Method

IsValidWithLog

Determines if an object is valid. Also provides a report on errors if this object happens not to be valid.

(Inherited from CommonObject.)

Public Method

LengthParameter(Double, Double.)

Gets the parameter along the curve which coincides with a given length along the curve. A fractional tolerance of 1e-8 is used in this version of the function.

(Inherited from Curve.)

Public Method

LengthParameter(Double, Double., Interval)

Gets the parameter along the curve which coincides with a given length along the curve. A fractional tolerance of 1e-8 is used in this version of the function.

(Inherited from Curve.)

Public Method

LengthParameter(Double, Double., Double)

Gets the parameter along the curve which coincides with a given length along the curve.

(Inherited from Curve.)

Public Method

LengthParameter(Double, Double., Double, Interval)

Gets the parameter along the curve which coincides with a given length along the curve.

(Inherited from Curve.)

Public Method

LocalClosestPoint

Find parameter of the point on a curve that is locally closest to the testPoint. The search for a local close point starts at a seed parameter.

(Inherited from Curve.)

Public Method

MakeClosed

If IsClosed, just return true. Otherwise, decide if curve can be closed as follows: Linear curves polylinear curves with 2 segments, NURBS with 3 or less control points cannot be made closed. Also, if tolerance > 0 and the gap between start and end is larger than tolerance, curve cannot be made closed. Adjust the curve’s endpoint to match its start point.

(Inherited from Curve.)

Public Method

MakeDeformable

If possible, converts the object into a form that can be accurately modified with “squishy” transformations like projections, shears, an non-uniform scaling.

(Inherited from GeometryBase.)

Public Method

MaxCurvaturePoints.

Returns a curve’s maximum curvature points. The maximum curvature points identify where the curvature starts to decrease in both directions from the points.

(Inherited from Curve.)

Public Method

MaxCurvaturePoints(.Double..)

Returns a curve’s maximum curvature points. The maximum curvature points identify where the curvature starts to decrease in both directions from the points.

(Inherited from Curve.)

Protected Method

MemberwiseClone

Creates a shallow copy of the current Object.

(Inherited from Object.)

Public Method

MemoryEstimate

Computes an estimate of the number of bytes that this object is using in memory.

(Inherited from GeometryBase.)

Protected Method

NonConstOperation

For derived classes implementers.

Defines the necessary implementation to free the instance from being constant.

(Inherited from Curve.)

Public Method

NormalizedLengthParameter(Double, Double.)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function.

(Inherited from Curve.)

Public Method

NormalizedLengthParameter(Double, Double., Interval)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function.

(Inherited from Curve.)

Public Method

NormalizedLengthParameter(Double, Double., Double)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve.

(Inherited from Curve.)

Public Method

NormalizedLengthParameter(Double, Double., Double, Interval)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve.

(Inherited from Curve.)

Public Method

NormalizedLengthParameters(.Double., Double)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function.

(Inherited from Curve.)

Public Method

NormalizedLengthParameters(.Double., Double, Interval)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve. A fractional tolerance of 1e-8 is used in this version of the function.

(Inherited from Curve.)

Public Method

NormalizedLengthParameters(.Double., Double, Double)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve.

(Inherited from Curve.)

Public Method

NormalizedLengthParameters(.Double., Double, Double, Interval)

Input the parameter of the point on the curve that is a prescribed arc length from the start of the curve.

(Inherited from Curve.)

Public Method

Offset(Plane, Double, Double, CurveOffsetCornerStyle)

Offsets this curve. If you have a nice offset, then there will be one entry in the array. If the original curve had kinks or the offset curve had self intersections, you will get multiple segments in the output array.

(Inherited from Curve.)

Public Method

Offset(Point3d, Vector3d, Double, Double, CurveOffsetCornerStyle)

(Inherited from Curve.)

Public Method

Offset(Point3d, Vector3d, Double, Double, Double, Boolean, CurveOffsetCornerStyle, CurveOffsetEndStyle)

(Inherited from Curve.)

Public Method

OffsetNormalToSurface

Finds a curve by offsetting an existing curve normal to a surface. The caller is responsible for ensuring that the curve lies on the input surface.

(Inherited from Curve.)

Public Method

OffsetOnSurface(BrepFace, Point2d, Double)

Offset a curve on a brep face surface. This curve must lie on the surface.

This overload allows to specify a surface point at which the offset will pass.

(Inherited from Curve.)

Public Method

OffsetOnSurface(BrepFace, Double, Double)

Offset this curve on a brep face surface. This curve must lie on the surface.

(Inherited from Curve.)

Public Method

OffsetOnSurface(Surface, Point2d, Double)

Offset a curve on a surface. This curve must lie on the surface.

This overload allows to specify a surface point at which the offset will pass.

(Inherited from Curve.)

Public Method

OffsetOnSurface(Surface, Double, Double)

Offset a curve on a surface. This curve must lie on the surface.

(Inherited from Curve.)

Public Method

OffsetOnSurface(BrepFace, .Double., .Double., Double)

Offset a curve on a brep face surface. This curve must lie on the surface.

This overload allows to specify different offsets for different curve parameters.

(Inherited from Curve.)

Public Method

OffsetOnSurface(Surface, .Double., .Double., Double)

Offset this curve on a surface. This curve must lie on the surface.

This overload allows to specify different offsets for different curve parameters.

(Inherited from Curve.)

Public Method

OffsetTangentToSurface

Finds a curve by offsetting an existing curve tangent to a surface. The caller is responsible for ensuring that the curve lies on the input surface.

(Inherited from Curve.)

Protected Method

OnSwitchToNonConst

Is called when a non-constant operation occurs.

(Inherited from GeometryBase.)

Public Method

PerpendicularFrameAt

Return a 3d frame at a parameter. This is slightly different than FrameAt in that the frame is computed in a way so there is minimal rotation from one frame to the next.

(Inherited from Curve.)

Public Method
Code Example
PointAt

Evaluates point at a curve parameter.

(Inherited from Curve.)

Public Method
Code Example

PointAtLength

Gets a point at a certain length along the curve. The length must be non-negative and less than or equal to the length of the curve. Lengths will not be wrapped when the curve is closed or periodic.

(Inherited from Curve.)

Public Method

PointAtNormalizedLength

Gets a point at a certain normalized length along the curve. The length must be between or including 0.0 and 1.0, where 0.0 equals the start of the curve and 1.0 equals the end of the curve.

(Inherited from Curve.)

Public Method

PullToBrepFace(BrepFace, Double)

Pulls this curve to a brep face and returns the result of that operation.

(Inherited from Curve.)

Public Method

PullToMesh

Makes a polyline approximation of the curve and gets the closest point on the mesh for each point on the curve. Then it “connects the points” so that you have a polyline on the mesh.

(Inherited from Curve.)

Public Method

Rebuild

Rebuild a curve with a specific point count.

(Inherited from Curve.)

Public Method

RemoveShortSegments

Looks for segments that are shorter than tolerance that can be removed. Does not change the domain, but it will change the relative parameterization.

(Inherited from Curve.)

Public Method

Repair

Repairs a curve.

(Inherited from Curve.)

Public Method
Code Example
Reverse

Reverses the direction of the curve.

(Inherited from Curve.)

Public Method

RibbonOffset(RibbonOffsetParameters, .Curve.., .Curve.., .Brep..)

Ribbon offset method to mimic RibbonOffset command

(Inherited from Curve.)

Public Method

RibbonOffset(Double, Double, Point3d, Vector3d, Double)

Offsets a closed curve in the following way: pProject the curve to a plane with given normal. Then, loose Offset the projection by distance + blend_radius and trim off self-intersection. THen, Offset the remaining curve back in the opposite direction by blend_radius, filling gaps with blends. Finally, use the elevations of the input curve to get the correct elevations of the result.

(Inherited from Curve.)

Public Method

RibbonOffset(Double, Double, Point3d, Vector3d, Double, .Curve.., .Surface..)

(Inherited from Curve.)

Public Method

RibbonOffset(Double, Double, Point3d, Vector3d, Double, .Double.., .Double..)

(Inherited from Curve.)

Public Method

Rotate

Rotates the object about the specified axis. A positive rotation angle results in a counter-clockwise rotation about the axis (right hand rule).

(Inherited from GeometryBase.)

Public Method

Scale

Scales the object by the specified factor. The scale is centered at the origin.

(Inherited from GeometryBase.)

Public Method
SetEndPoint

Forces the curve to end at a specified point. Not all curve types support this operation.

(Inherited from Curve.)

Public Method
SetStartPoint

Forces the curve to start at a specified point. Not all curve types support this operation.

(Inherited from Curve.)

Public Method

SetUserString

Attach a user string (key,value combination) to this geometry.

(Inherited from GeometryBase.)

Public Method

Simplify

Returns a geometrically equivalent PolyCurve.

The PolyCurve has the following properties

1. All the PolyCurve segments are LineCurve, PolylineCurve, ArcCurve, or NurbsCurve.

2. The NURBS Curves segments do not have fully multiple interior knots.

3. Rational NURBS curves do not have constant weights.

4. Any segment for which IsLinear() or IsArc() is true is a Line, Polyline segment, or an Arc.

5. Adjacent co-linear or co-circular segments are combined.

6. Segments that meet with G1-continuity have there ends tuned up so that they meet with G1-continuity to within machine precision.

(Inherited from Curve.)

Public Method

SimplifyEnd

Same as SimplifyCurve, but simplifies only the last two segments at “side” end.

(Inherited from Curve.)

Public Method

Smooth(Double, Boolean, Boolean, Boolean, Boolean, SmoothingCoordinateSystem)

Smooths a curve by averaging the positions of control points in a specified region.

(Inherited from Curve.)

Public Method

Smooth(Double, Boolean, Boolean, Boolean, Boolean, SmoothingCoordinateSystem, Plane)

Smooths a curve by averaging the positions of control points in a specified region.

(Inherited from Curve.)

Public Method

SpanDomain

Get the domain of the curve span with the given index. Use the SpanCount property to test how many spans there are.

(Inherited from Curve.)

Public Method

SpanVector

(Inherited from Curve.)

Public Method

Split(Double)

Splits (divides) the curve at the specified parameter. The parameter must be in the interior of the curve’s domain.

(Inherited from Curve.)

Public Method

Split(IEnumerable.Double.)

Splits (divides) the curve at a series of specified parameters. The parameter must be in the interior of the curve domain.

(Inherited from Curve.)

Public Method

Split(Brep, Double)

Obsolete.

Splits a curve into pieces using a polysurface.

(Inherited from Curve.)

Public Method

Split(Surface, Double)

Obsolete.

Splits a curve into pieces using a surface.

(Inherited from Curve.)

Public Method

Split(Brep, Double, Double)

Splits a curve into pieces using a polysurface.

(Inherited from Curve.)

Public Method

Split(Surface, Double, Double)

Splits a curve into pieces using a surface.

(Inherited from Curve.)

Public Method
TangentAt

Evaluates the unit tangent vector at a curve parameter.

(Inherited from Curve.)

Public Method

ToArcsAndLines

Converts a curve into polycurve consisting of arc segments. Sections of the input curves that are nearly straight are converted to straight-line segments.

(Inherited from Curve.)

Public Method

ToJSON

Create a JSON string representation of this object

(Inherited from CommonObject.)

Public Method

ToNurbsCurve.

Constructs a NURBS curve representation of this curve.

(Inherited from Curve.)

Public Method

ToNurbsCurve(Interval)

Constructs a NURBS curve representation of this curve.

(Inherited from Curve.)

Public Method

ToPolyline(Double, Double, Double, Double)

Gets a polyline approximation of a curve.

(Inherited from Curve.)

Public Method

ToPolyline(Int32, Int32, Double, Double, Double, Double, Double, Double, Boolean)

Gets a polyline approximation of a curve.

(Inherited from Curve.)

Public Method

ToPolyline(Int32, Int32, Double, Double, Double, Double, Double, Double, Boolean, Interval)

Gets a polyline approximation of a curve.

(Inherited from Curve.)

Public Method
TorsionAt

Evaluate the torsion of a curve at a parameter. Sometimes also called the “second curvature”, torsion is the rate of change of a curve’s osculating plane.

(Inherited from Curve.)

Public Method

ToString

Returns a string that represents the current object.

(Inherited from Object.)

Public Method

Transform

Transforms the geometry. If the input Transform has a SimilarityType of OrientationReversing, you may want to consider flipping the transformed geometry after calling this function when it makes sense. For example, you may want to call Flip() on a Brep after transforming it.

(Inherited from GeometryBase.)

Public Method

Translate(Vector3d)

Translates the object along the specified vector.

(Inherited from GeometryBase.)

Public Method

Translate(Double, Double, Double)

Translates the object along the specified vector.

(Inherited from GeometryBase.)

Public Method

Trim(Interval)

Removes portions of the curve outside the specified interval.

(Inherited from Curve.)

Public Method

Trim(CurveEnd, Double)

Shortens a curve by a given length

(Inherited from Curve.)

Public Method

Trim(Double, Double)

Removes portions of the curve outside the specified interval.

(Inherited from Curve.)

Public Method

TryGetArc(Arc.)

Try to convert this curve into an Arc using RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

TryGetArc(Arc., Double)

Try to convert this curve into an Arc using a custom tolerance.

(Inherited from Curve.)

Public Method

TryGetArc(Plane, Arc.)

Try to convert this curve into an Arc using RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

TryGetArc(Plane, Arc., Double)

Try to convert this curve into an Arc using a custom tolerance.

(Inherited from Curve.)

Public Method
Code Example

TryGetCircle(Circle.)

Try to convert this curve into a circle using RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method
Code Example

TryGetCircle(Circle., Double)

Try to convert this curve into a Circle using a custom tolerance.

(Inherited from Curve.)

Public Method

TryGetEllipse(Ellipse.)

Try to convert this curve into an Ellipse within RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

TryGetEllipse(Ellipse., Double)

Try to convert this curve into an Ellipse using a custom tolerance.

(Inherited from Curve.)

Public Method

TryGetEllipse(Plane, Ellipse.)

Try to convert this curve into an Ellipse within RhinoMath.ZeroTolerance.

(Inherited from Curve.)

Public Method

TryGetEllipse(Plane, Ellipse., Double)

Try to convert this curve into an Ellipse using a custom tolerance.

(Inherited from Curve.)

Public Method
Code Example

TryGetPlane(Plane.)

Test a curve for planarity and return the plane.

(Inherited from Curve.)

Public Method

TryGetPlane(Plane., Double)

Test a curve for planarity and return the plane.

(Inherited from Curve.)

Public Method

TryGetPolyline(Polyline.)

(Inherited from Curve.)

Public Method

TryGetPolyline(Polyline., .Double..)

(Inherited from Curve.)